Assembly should be the screw pump parts carefully cleaned, inspection, damaged parts should be replaced;
When assembling the shaft joint, check whether the seal ring is damaged and fill the grease in the cavity;
Properly installed bearings make the shaft rotation flexible, no blocking phenomenon.
SHAFT SEAL Installation: Packing letter installation, the packing gland should be pressed bolt position in the Shell installation window, easy wrench adjustment bolts;
When the discharge body presses tightly fixed, the nut tightening should be uniform;
The mechanical seal installation should be careful, the friction pair end face should clean and apply grease;
When installing the stator, apply lubricating oil to the rotor and the stator cavity surface, which is advantageous to the stator installation.
Related Industry Knowledge
- The mechanical structure of submers...
- Selection of Screw pump
- The safe use of screw pump
- Maintenance knowledge of Submersibl...
- The structure of the vortex pump is...
- Working principle of Vortex pump
- Features of Vortex Pump
- Vortex pump is becoming more and mo...
- Energy saving and high efficiency o...
- Application of submersible Sewage pump
- nstallation instructions
- The use and characteristics of deep...